Ivana Gomes Maia

Título


Estudo comparativo do ensaio de fratura de disco chanfrado e da fadiga a compressão diametral de misturas asfálticas.

Orientador(es)


Laura Maria Goretti da Motta

Resumo


A proposta desta pesquisa foi comparar os parâmetros obtidos no ensaio de fratura  com os resultados obtidos do ensaio de fadiga por compressão diametral  a tensão controlada, visando avaliar a sua potencialidade na previsão de desempenho do pavimento quanto ao trincamento.  A minimização da deterioração precoce de um pavimento asfáltico possibilita gerar uma curva de fadiga que permite  estimar a vida útil.  Os resultados  indicaram uma  boa correlação entre a força de pico e o parâmetro da curva de fadiga (n),  que expressa a  sensibilidade ao nível de tensões impostas no ensaio. Esta correlação apresentou tendência linear: quanto maior a força de pico maior a sensibilidade ao nível de tensões na vida de fadiga.  A energia de fratura (Gf), quando correlacionada com a sensibilidade ao nível de tensões (n), apresentou uma tendência polinomial de ordem 3 conforme proposto por  RODRIGUES (1991) e BRAZ (1997). As correlações feitas, utilizando o parâmetro K do ensaio de fadiga convencional, apresentaram muita dispersão impossibilitando  a estimativa de alguma tendência de comportamento. No geral, percebeu-se que se o material é frágil, apresentará menor penetração do ligante, menor energia de fratura, porém maior resistência à tração, resultando numa força de pico maior.

Abstract


The purpose of this research is to compare the parameters obtained from tensile tests  with  the results of conventional fatigue test by diametrical compression and
to  evaluate its potential in predicting performance on the pavement cracking. Minimizing  the  early deterioration  of  an  asphalt pavement  able to generate  a  curve  that estimates  the  fatigue  life.  The results indicated a good correlation between the peak force (PF) and the parameter of the fatigue curve (n) that expresses sensitivity to the level of tension imposed on the test. This correlation showed a linear trend: the higher the peak force, the higher  is  the sensitivity to stress level on fatigue life. The fracture energy (Gf), when correlated with sensitivity to stress level (n) showed a trend  of a polynomial   relation  of order 3  as proposed  RODRIGUES (1991) and BRAZ (1997). The correlations made,  using the parameter K of conventional fatigue test,  showed much scatter,  making it impossible to estimate any trends of behavior. Overall, it was noted that if the material is fragile there will be a lower penetration of the binder and lower fracture energy. On the other hand, there will be a higher tensile strength, which results in a higher peak force.

Print