images/Logo/logo_50anos_novo1.jpg

Jéssica Beatriz da Silva

Título

COMPORTAMENTO SOB ALTAS TEMPERATURAS DE CONCRETOS COM AGREGADOS RECICLADOS DE CONCRETO

Orientador(es)


Romildo Dias Toledo Filho

Resumo

O agregado reciclado de concreto (ARC) apresenta características distintas do agregado natural, pois é formado por parte de agregado natural com argamassa aderida no seu entorno. Essa diferença afeta suas propriedades e a do concreto com eles produzido. Para o uso racional dos ARC na produção do concreto é necessário se conhecer a relação entre o teor de argamassa aderida e as propriedades reológicas, físicas, mecânicas, e de durabilidade dos concretos. Um comportamento de particular interesse, e que ainda não está completamente estudado na literatura técnica, diz respeito ao comportamento desses concretos sob altas temperaturas. O presente trabalho
visa, portanto, avaliar a influência dos ARC no comportamento físico, mecânico e microestrutural de concretos de distintas classes de resistência (C25 e C65) após exposição às temperaturas de 150, 400 e 650 °C. Os concretos foram dosados utilizando-se o método de empacotamento compressível e os teores de substituição, em volume, de agregado graúdo natural por ARC foram de 50 e 100% para permitir avaliar a influência do teor de argamassa aderida nas propriedades residuais dos concretos. Os resultados obtidos mostraram que os concretos contendo ARC apresentaram praticamente o mesmo comportamento mecânico dos concretos convencionais. Até uma temperatura de 150 o C as propriedades dos concretos foram aumentadas e uma maior degradação iniciou-se apenas a partir dos 400 o C. Análises microestruturais mostraram o aumento gradual de fissuras nas interfaces agregado-argamassa antiga, agregado-argamassa nova e argamassa nova-argamassa antiga a partir dessa temperatura.

Abstract

Recycled aggregate of concrete (RAC) presents different characteristics from the natural aggregates because it is formed by part of natural aggregate with attached mortar around. This difference directly affects its properties and consequently the concretes produced with. Thus, for the rational use of the RAC in the concrete production, it is necessary to know the relation between the amount of the attached mortar and the rheological, physical, mechanical and durability properties of the concrete. It is interesting to mention that there are not fully studies about the behavior of these concretes under high temperatures. The present work aims to evaluate the influence ofrecycled aggregates on the physical, mechanical and microstructural behavior of different classes of concrete (C25 e C65), after exposure to temperatures of 150, 400 and 650°C. The concretes were designed using the compressive packing method and the substitution contents, by volume, of coarse natural aggregates by RAC were about 50 and 100%, in order to access the influence of the stuck mortar on the residual properties of the concrete. The results showed that the concretes containing RAC presented practically the same mechanical behavior with the conventional concrete. Until 150°C, the properties of the concretes rose, and a higher degradation started only at 400°C. Microstrutural analyses showed a gradual increase of cracks in the interfaces aggregate-old mortar, aggregate-new mortar and new mortar – old mortar, from this temperature.

Imprimir